Total Pageviews

Strike Freedom Gundam Full Burst Mode MG Review Part 3

Written By Om3ga062012 on Thursday, August 30, 2012 | 9:12 PM

On this part i will equip this gunpla with Beam Rifles, "Xiphias 3" Rail Cannons and Super DRAGOON System. 

Armed with Beam Rifles-a
Armed with Beam Rifles-b

Armed with Beam Rifles-c
Armed with Beam Rifles-d

Action pose with Beam Rifles-a
Action pose with Beam Rifles-b

Action pose with Combined Beam Rifles-a
Action pose with Combined Beam Rifles-b

Action pose with Combined Beam Rifles-c
Action pose with Combined Beam Rifles-d

Action pose with Combined Beam Rifles-e
Action pose with Rail Cannons-a

Action pose with Rail Cannons-b
Action pose with Rail Cannons-c

Full Burst Mode-a
Full Burst Mode-b

By the way be careful when assembling the wings part, the yellow part connector between each wings (Front & Rear) are very fragile. Because i made a fatal mistake when assembling the left wings, so i have to disassemble it if i want to spread it open. After that, i learn the inner mechanism of the wing from the manual guide carefully, then finally i can assemble the other wing without any problem.

Also read carefully the manual guide when you try to bend the clear part (x8) for DRAGOON effect (200mm long each of them) or you will ruin the Full Burst Mode. 

Pros:
  • This one can perform action pose just like on the anime series
  • Not just one but 2 action base included (one with star-like shape to perform action pose you can see it on part 2; while the other one ( i use it on this 3rd part) also to perform action pose but with full burst mode)
  • I like the bended beam sabers (its more like katana sword lol...)
  • I also like the DRAGOON effect
Cons:
  • The inner frame is not fully gold-coated
  • The wings mechanism is very fragile
  • The backpack (with both wings attached) is very heavy, this gunpla will fell off easily when you try to perform action pose with both wings spread open, thats why this one came with action base
9:12 PM | 0 comments | Read More

Strike Freedom Gundam Full Burst Mode MG Review Part 2

Written By Om3ga062012 on Monday, August 27, 2012 | 7:13 PM

As usual on part 2 i will equip this gunpla with weapons and perform some action poses, first i will start with "Super Lacerta" Beam Sabers, and the Shield.

Standby Mode with All Armaments-a
Standby Mode with All Armaments-b

Standby Mode with All Armaments-c
Standby Mode with All Armaments-d

Action Pose with Beam Sabers-a
Action Pose with Beam Sabers-b

Action Pose with Beam Sabers-c
Action Pose with Beam Sabers-d

Action Pose with Beam Sabers-e
Action Pose with Beam Sabers-f

Action Pose with Beam Sabers-g
Action Pose with Combined Beam Saber & Shield-a

Action Pose with Combined Beam Sabers & Shield-b
Action Pose with Combined Beam Sabers & Shield-c
Action Pose with Combined Beam Sabers & Shield-d
Action Pose with Combined Beam Sabers & Shield-e

Action Pose with Combined Beam Sabers & Shield-f
Action Pose with Combined Beam Sabers & Shield-g

To be Continued on Part 3...
7:13 PM | 0 comments | Read More

Strike Freedom Gundam Full Burst Mode MG Review Part 1

Written By Om3ga062012 on Thursday, August 23, 2012 | 7:32 PM

Strike Freedom Gundam (ZGMF-X20A) is an upgraded version of Freedom Gundam (ZGMF-X10A), this mobile suit appear in Mobile Suit Gundam Seed Destiny anime series and its piloted by Kira Yamato. This one is armed with special feature to lock onto multiple enemy targets called the DRAGOON System which is located on its wings, this feature give Strike Freedom a 360 degree attack range known as Full Burst Mode.

The Master Grade version of this gundam first released by Bandai on late December 2006. It consists of 27 plastic runners set, with 2 different large action base included (one with the standard design for Master Grade and the other one with the star-like shape), shield effect, DRAGOON System effect also there is bonus poster "Kira Yamato vs Shinn Asuka".

Boxart of Strike Freedom Gundam Full Burst Mode
Manual Guide (Front Cover)
Manual Guide (Back Cover)


Armaments of Strike Freedom

Standby Mode-a
Standby Mode-b

Standby Mode-c
Strike Freedom with All Armaments

 To be continued on Part 2...

7:32 PM | 0 comments | Read More

Gundam 00 Quanta MG Review Part 3

Written By Om3ga062012 on Monday, August 20, 2012 | 4:47 PM

On this part i will try to equip this gunpla with GN Sword V, so far i have no problem with the sword however when i attached all GN Sword Bits on the GN Shield, the body become unbalance and always lean to the right. This time i'm using Celestial Being Action Base (sold separately) to perform flying mode with GN Sword Bits around it.

Standby Mode armed with Sword & Shield-a
Standby Mode armed with Sword & Shield-b

Standby Mode armed with Sword & Shield-c
Standby Mode armed with Sword & Shield-d
Action pose with GN Sword V-a

Action pose with GN Sword V-b
Action pose with GN Sword V-c

Action pose with GN Sword V-d

Action pose with GN Sword V-e
Action pose with GN Sword V-f

Action pose with GN Sword V (Rifle mode)-a

Action pose with GN Sword V (Rifle mode)-b
Action pose with GN Sword V (Rifle mode)-c

Action pose with GN Sword V (Rifle mode)-d
Action pose with GN Sword V (Rifle mode)-e

Pros:
  • This model kit can perform various action pose
  • GN Sword V as the main weapon has unique design, especially when it transformed into GN Buster Sword or GN Buster Rifle
  • Small action base (Black) included
Cons:
  • This model kit has weight issue when you equip it with GN Shield + GN Sword Bits attached
  • No LED light included
4:47 PM | 0 comments | Read More
Related Posts Plugin for WordPress, Blogger...